OHPC MT, DTE, TNE Syllabus 2023 Check Subject Wise Syllabus, PDF Download at ohpcltd.com

OHPC MT, DTE, TNE Syllabus- Odisha Hydro Power Corporation Ltd. will conduct the computer-based test. For Management Trainee, Diploma Engineer Trainee, and Technical Non-Executive Trainee positions, it has begun the online registration process. Numerous candidates have applied for the position.

The most recent announcement from the OHPC states that a computer-based examination will be held in December 2023. Please make use of this article by candidates who have completed the online registration process and are beginning CBT preparation. Download the OHPC Management Trainee Syllabus 2023, the OHPC Diploma Engineer Trainee Syllabus 2023, and the OHPSC Technical Non Executive Syllabus at www.ohpcltd.com if you want to pass the OHPC CBT Examination.

OHPC MT, DTE, TNE Syllabus 2023

On the scheduled date, the higher authorities of Odisha Hydro Power Corporation Limited (OHPC) intend to hold the exams for Graduate Engineer Trainee, Diploma Engineer Trainee, and Management Trainee at various testing centers. The information regarding the examination centers that are available to applicants can be found on the official website of The OHPC MT, DTE, TNE Syllabus 2023 must be collected by each candidate as soon as possible to begin their preparations.

Competitors will be able to compete for the highest score on the Graduate Engineer Trainee, Diploma Engineer Trainee, and Management Trainee written exams if they have the concept on the ohpcltd.com GET, DET, MT Syllabus 2023. We have organized the entire and specifics of the OHPC GET Syllabus 2023, the ohpcltd.com Exam Pattern 2023, and the Odisha Hydro Power Corporation Limited Selection Process in the sections that follow. The direct link to download the OHPC GET Syllabus 2023 in PDF format for free is provided at the page’s conclusion.

OHPC MT, DTE, TNE Syllabus

OHPC MT, DTE, TNE Syllabus 2023 Details

OHPC MT, DTE, TNE Syllabus 2023
Organization Name Odisha Hydro Power Corporation Limited (OHPC)
Post Name Technical Non-Executive (TNE) Trainees, Management Trainees (MT), and Diploma Engineer Trainees (DET)
Category Syllabus
Job Location Any of the Units/ Project Sites & Offices of OHPC and its subsidiaries (Odisha)
Official Site ohpcltd.com

About OHPC

Odisha Hydro Power Corporation Ltd. (OHPC) was incorporated under the Companies Act 1956 on April 21, 1995, as a result of Odisha’s power sector reform. Its goals are. to acquire, construct, operate, maintain, renovate, and modernize hydroelectric, nuclear, and other non-conventional energy-based electric generating stations in the state of Odisha as well as other hydroelectric, thermal, and nuclear generating stations. to engage in the purchase, sale, import, export, production, trading, manufacturing, or other form of dealing in hydroelectric, thermal, or nuclear electric power derived from any non-conventional energy sources.


The Odisha Hydro Power Corporation Ltd, OHPC DET MT Syllabus 2023 Pdf is now readily available online. Candidates must use the syllabus developed by the board when preparing for the OHPC. It is a tool that helps kids learn better. It explains the course, its resources, and how to succeed in it in detail. The OHPC Syllabus contains all of the information students need to read and prepare for the exam. In addition, it evaluates their achievement of the learning objectives.

The OHPC MT, DTE, TNE Syllabus 2023 can be downloaded by candidates from the sections listed below. The OHPC GET Syllabus 2023 has been divided into subject-specific sections along with subtopics. Candidates can quickly and easily begin their preparations as a result of this. by getting the OHPC GET Syllabus 2023 downloaded.

OHPC MT, DTE, TNE Syllabus 2023 Subject Wise

Part- 1 Topics

Quantitative Aptitude

  • Whole Numbers
  • Decimals
  • Fractions And Relationships Between Numbers
  • Profit & Loss
  • Discount
  • Partnership Business
  • Mixture And Alligation
  • Time And Distance
  • Percentage
  • Ratio And Proportion
  • Square Roots
  • Graphs Of Linear Equations
  • Triangle And Its Various Kinds Of Centres
  • Congruence Along With The Similarity Of Triangles
  • Averages
  • Interest
  • Time & Work
  • Basic Algebraic Identities Of School Algebra
  • Circle And Its Chords
  • Tangents
  • Etc

English Language

  • Error Recognition
  • Filling In The Blanks
  • Grammar
  • Sentence Structure
  • Vocabulary
  • Spellings
  • Antonyms
  • Sentence Completion
  • Phrases And Idiomatic Use Of Words
  • Synonyms
  • Comprehension
  • Etc


  • Semantic Analogy
  • Symbolic/ Number Analogy
  • Number Series
  • Figural Series
  • Problem Solving
  • Word Building
  • Coding & decoding
  • Numerical Operations
  • Figural Analogy
  • Semantic Classification
  • Symbolic/ Number Classification
  • Drawing inferences
  • Punched hole/ pattern-folding & unfolding
  • Figural Classification
  • Semantic Series
  • symbolic Operations
  • Trends
  • Space Orientation
  • Space Visualization
  • Venn Diagrams
  • Etc

Part II Topics

Indicative Syllabus For CBT (Respective Discipline)

Diploma Engineer Trainees (Electrical Syllabus)

  • Basics of Electricity: A.C. theory, fundamentals, and electrification generation Measuring Instruments, Power, Electrical Energy Conversion, Wiring and Power Billing, and An Overview of Renewable Power Generation
  • Materials for Electrical Engineering: Materials with conductivity, semiconductivity, insulating properties, dielectric properties, magnetic properties, and materials with special DC/AC applications
  • Equipment and Transformer: Analog Circuits and Electronics: Induction motor, Alternator, Synchronous Motor, Single Phase Induction Motor AC Commutator Motors, Special Electric Machine, Three Phase Transformers, DC Generators, DC Motors, Single Phase Transformer, Auto Transformer, Three Phase Transformer Field effect transistor, Operational amplifiers, P-n junction diode, Special semiconductor devices, Rectifier circuits and filters, Transistors, Transistor circuits, Transistor amplifiers and oscillators
  • Electrical instruments for measuring and weighing: Instrument transformers, analog ammeters and voltmeters, wattmeter’s for power measurement, energy meters for energy measurement, speed, frequency, and power factor measurement, resistance, inductance, and capacitance, digital instruments
  • System of Control: Analysis of stability, Frequency response of the system, signal flow graph, and Niquiest plot
  • Electronics digital: Boolean algebra, logic gates, combinational and sequential circuits, logic families, counters, registers, digital to analog and analog to digital converters, and display devices are all examples of number systems and codes. Electricity generation and transmission, overhead lines, short and medium line performance, EHV transmission, distribution system, underground cable, economic aspects, tariff types, substation circuit, and
  • Theory of Networks: Magnetic circuits, network analysis, network theorems, ac circuit and resonance, coupled circuits, transients, two-port network, filters, microprocessor: Introduction to the microprocessor and microcontroller, 8085A microprocessor architecture, 8085A programming, memory and I/O interface, peripheral interface, DAC and ADC interface, and application of 8085A power electronics and drives: Power Semiconductor Devices, Thyristor Applications, AC and DC Drives, Firing Circuits for Thyristor, Phase Controlled Rectifier, Inverter, Chopper, and Cycle Converter
  • Material for Civil Engineering: Stone, bricks, clay products and refractory materials, cement, sand, gravel, morrum and fly ash, mortar and concrete, timber, paint, varnish, and dishwashing liquid, iron and steel, bituminous materials, plastics, heat proofing materials, and acoustic materials
  • Technology for the Building: Introduction to Construction Technology, Site Investigation, Damp Proofing, Foundations, Walls, Arches and Lintels, Doors and Windows, Floors, Roofs, Stairs, Surface Finishes, and the General Idea of Seismic Planning, Building Design, and Construction Machineries are all covered in this course.
  • Trusses and frames, slope and Deflection, Fixed Beam, Continuous Beam, Slope Deflection Method, Moment Distribution Method, and Three Hinged Arches are all components of structural analysis. Engineering of Transportation: Road Geometric, Road Materials, Road Pavements, Hill Roads, Road Drainage, Road Maintenance, Construction Equipment, Traffic Studies, Landscaping And Arboriculture, Railway Transportation, Permanent Way, Track Materials, Geometric For Broad Gauge, Points And Crossings, Laying And Maintenance Of Track, Bridges, Bridge Site Investigation, Hydrology And Planning, Bridge Foundation, Bridge Substructure And Approaches, Permanent Bridges, Culvert And Causeway, Docks And Harbors Break Waters Docks, Tunnel
  • Engineering for Irrigation: Water Requirement of Crops, Flow Irrigation, Diversion Head Works, Regulatory Works, Cross Drainage Works, Dams, Water Logging and Drainage, and Ground Water Hydrology are all covered in this introduction to irrigation engineering. Estimating: Introduction to Estimating, In-Depth Estimates of Buildings in accordance with PWD Specifications and Standards, Rate Analysis, Administrative Structures of Engineering Organizations, In-Depth Estimates of Culverts and Bridges, In-Depth Estimates of Irrigation Structures, In-Depth Estimates of Roads, and PWD Accounts Work
  • Design of the Structure: Working Stress Method of Design, Limit State Method of Design (Lsm), Limit State Of Collapse Of Singly Reinforced Members In Bending, Limit State Of Collapse In Shear, Bond Anchorage, Development Lengths And Slicing (Lsm), Beams (Lsm), Two Way Slabs (Lsm), Axially Loaded Short Columns (Lsm), Ductile Detailing Of Reinforced Concrete Structures, Design Of Steel, Design Of Timber Structure Advanced Construction Technology: An Overview of Construction Management, Construction Planning, Materials Management, Site Management, Construction Organization, Labor Management, Equipment Management, Quality Control, and Safety Management in Construction Works Construction and earth-moving equipment, earthquake-resistant construction, building services, and concrete mixed design and transportation
  • Mechanics: Equilibrium, Friction, Centroid and Moment of Inertia, Simple Machines, and Dynamics Theory of Machines: Fundamentals of Engineering Mechanics Mechanism simplicity, friction, power transmission, governors and flywheel, machine balance, and machine component vibration Strength of Material: Two-dimensional stress systems, simple stress and strain, thin cylinder and spherical shell under internal pressure, bending moment and shear force, theory of simple bending, combined direct and bending stresses, and torsion are all examples of mechanical measuring instruments. Introduction to measurement, Linear, Angular, Limits, Fits, and Tolerancing, Transducers, Strain, Pressure, and Temperature Measurement Pneumatics and Hydraulics: Hydrostatics, Fluid Flow, Flow through the Pipe, Impact of Jets, Hydraulic Turbines, and Hydraulic Pumps are all examples of fluid properties.
  • Design for Production: Calculation of Design in Engineering Drawings and Designs: Engineering Automobiles and Hybrid Vehicles: Technology for manufacturing and manufacturing processes (such as drilling, milling, and boring): Materials for tools, cutting tools, a lathe, a shaper, a planning machine, a milling machine, a slotter, grinding, internal machining, surface finishing, and lap lapping are all examples of manufacturing processes. Measurements and metrology, tolerance limits, and fits: Power plant engineering and thermal engineering: Concepts and terminology, Energy and Work Transfer, Thermodynamics’ First and Second Laws, Working Substances, Ideal and Real Gases, Vapor Power Cycles, Gas Power Cycles, Fuels and Combustion, Heat Transfer, Refrigeration Cycles, Power Plant Engineering/Introduction, Steam Power Plant, Nuclear Power Plant, Diesel Engine Power Plant, Hydel Power Plant

Post- Management Trainee ( Finance) Syllabus

Financial Accounting

  • Accounting Standards
  • Corporate Accounts
  • Indirect & Direct – Tax Management
  • Auditing
  • Corporate & Industrial Laws

Cost & Management Accounting

  • Costing Techniques
  • Cost Audit
  • Project Planning, Financing, Analysis and Management
  • Advertisement
  • Quantitative Techniques
  • Operation & Project Management Control

Financial Management

  • Management Science
  • International Financial Management
  • Risk Management
  • Capital Market Analysis
  • Financial Derivatives
  • Security Analysis and Investment Management

General Managerial Economics

  • Management Information Systems
  • Computer Applications in Business
  • Management Control System

Human Resource Management

  • Human Resource Planning
  • Recruitment & Selection
  • Human Resource Development: Strategies and Systems
  • Performance Management & Appraisal
  • Competency Mapping
  • Training and Development
  • Management of Compensations and Benefits
  • Rewards & Recognition
  • Human Capital Management & HR Audit
  • Organizational Structure Design/Development and Change
  • Management Process and Organizational Behavior
  • Management of Change and Organization Effectiveness
  • Managing Interpersonal and Group Processes
  • Emotional Intelligence and Managerial Effectiveness
  • Transactional Analysis
  • Corporate Communication
  • Industrial Relations & Trade Unions
  • Labour Laws
  • Conflict Management
  • Collective Bargaining and Negations process
  • Grievance Management
  • Contemporary IR
  • Management Science
  • Business Policy and Strategic Analysis
  • Corporate Evolution and Strategic Management
  • Cross Cultural and Global Management
  • International Business Environment
  • Business Ethics, Corporate Governance & Social Responsibility
  • Understanding Society and Social Structure
  • Computer Applications in Business
  • Management Information Systems
  • Human Resource Informatic

Basics of Mathematics & Statistics

  • Entrepreneurship Development and Management of Real Estate
  • Basic Computer Applications
  • Real Estate Fundamentals
  • Management Concepts & Practices
  • Economics for Managers
  • Fundamentals of Accounting
  • Legal Framework for Real Estate
  • Accounting for Managers
  • Real Estate Valuation
  • Real Estate Development Model
  • Ethics & Environmental Studies
  • Real Estate Approval & Sanction
  • Building Materials & Design
  • Inventory & Materials & Logistics Management
  • Construction Management
  • Financial Management of Business
  • Marketing Management
  • Human Resource Management
  • Real Estate Investment Management
  • Maintenance Management
  • Green Practices in Real Estate
  • Low Cost Affordable Housing & Space Saving Interiors
  • Business Operations Management
  • Research Methodology for Business
  • Odisha Land Reforms Act,1960
  • Laws Related to Land & Estate, Survey, Settlement, land acquisition &
    Eviction etc.

Post Management Trainee (PR)

  • Communication process, theories and models. Types of mass communication; Media and Society – Media and Social change; problems barriers, diffusion and adoption theories.
  • Development communication, scope, issues, contents, effects problems, relevance, use of multi-media, etc. Strategies – adaptation to rural India.
  • Newspaper Reporting and writing – Types of reporting’; techniques; investigative, advocacy, depth; specialised reporting; Courts and Crime; writing for specialised newspapers and magazines; sourcing, data gathering etc.
  • Principles of editing, design and layout, production and printing methods – current trends in newspapers and magazines;
  • Broadcasting system in India; scope and nature; low cost media, relative advantage, and satellite communication. Role of radio and TV in multilingual society – kinds of radio and TV programmes, impact of Radio and TV – Audience participation.
  • Basic communication research, types of research, basic applied, policy research, Impact studies, Research methods, stages of research; research tools and sampling.
  • Comparative history of media – Press & Broadcasting highlights of the history of Indian Press, Press in Indian Languages. Media Laws, Constitution of India, Press Council and Codes of Ethics.
  • Public Relations, Place of PR in communication, PR process and campaign planning, etc Public Opinion and propaganda.
  • Organization and functions of public relation departments in private and public sector organisations, characteristics of the PR man, various publics, internal and external.
  • PR planning, press relations, industrial relations, consumer, community, Government, company relations, PR and the management.
  • Tools of public relations: press releases, newsletter, brochure, house journals, advertising, exhibitions, annual reports. PR and corporate image; public relations in central and state government in India.
  • Role of PR in developing countries, role of multimedia publicity; Rural PR.
  • Trends, issues, contents – Environmental analysis and policy surveys, PR
    and Opinion research

TNE Syllabus Post- Electrical Trainee

  • Safe working practices, Environment regulation.
  • Trade tools, Conductors, Cables, Measuring instruments.
  • Basic Electrical Laws (Kirchhoff’s law, Ohm’s law) & Law of magnetism etc.
  • Knowledge of various types of Generators, it’s rating, cooling, ventilation, bearings, lubrication, excitation , governing systems, pressure and flow, protection & control of different systems of a generating unit.
  • Electrical wire joints & soldering, Winding etc.
  • Electrical connection, Batteries (Test, service, recharge & installation), Stabilizer, UPS,
    Inverter & Earthing.
  • Electronic control circuit, Relay & Circuit breaker.
  • Wiring system, Testing of electrical/electronic equipment.
  • DC machines, AC motors, Induction motors, Alternator & MG set, Transformer.
  • Electrical/ Electronic measurement.
  • Electrical illumination system, Light fittings
  • Domestic Appliances,
  • Power plant (Thermal, Hydel, Solar, Wind), Power lines.
  •  Distribution system, Control cabinet.

Mechanical Trainee

  • Safe working practices, Environment regulation.
  • Measuring instrument, Accuracy evaluation.
  • Knowledge of Turbine & its auxiliaries, lubricating system, oil coolers, governors,
  • Knowledge of AC plant and ventilation.
  • Different types of Fitting operations.
  • Working principles of Lathe & Drilling Machine, Reaming, Offhand Grinding, Tapping, Dyeing, Scraping, Fastening, different types of packing & sealing.
  • Overhauling & Lubrication, concept on Bearing, sleeves.
  • Power tool operation, Assembling & Fitting, Pipe joints, gaskets, Dismantle and Assemble valves & fittings in pipes, pumps , motors, compressors, vehicles, trolleys etc.
  • Working principle of Welding, ARC & Gas welding and Sheet metal working by Soldering, Brazing operation.
  • Forging, Limits, Fits and tolerance.
  • Pneumatic & hydraulic components.
  • Inspection of Machine tools, Repair & maintenance of machinery.
  • Power Transmission system.

Crane Operator Trainee

  • Safe working practices, Environment regulation.
  • Different types of cranes and their specifications & operations.
  • Electrical systems of cranes.
  • Dismantling & overhauling of different parts of crane, fitting of equipment.
  • Valves, Engine oils, joints, gaskets, packings, scales, seals.
  • Engineering chain tapes-rope, pulley chain, trolleys, wire gauges and ladder.
  • Control systems of the cranes.
  • Operation and Maintenance of the cranes.
  • Measuring instruments.
  • Types of brakes, limit switch, crane signals, drives and interlocks of cranes.
  • Basic Electricity Rules, insulation and earthing.
  • Inspection of crane equipment.
  • Common defects, unsafe conditions of crane movement.

Store Keeper Trainee

  • Accounting, different types of materials, coding and preservation of materials,
    estimate and budget, survey etc.
  • Accounting and control of purchases, storage and issue of materials.
  • Different types of manuals, registers, accounts etc.
  • Indent and Material requisition, store keeping procedure, Stocks and inventory, Audit.
  • Basic Business Laws.
  • Creating Accounting Ledgers and Groups; Creating Stock Items and Groups
  • Concept and features of DBMS (Data Base Management System); DBMS in Business Application; Generating Accounting Information.
  • Conversion table on weight, length and all types of measurements.
  • Knowledge of firefighting systems, first-aid, safety rules.
  • Basic knowledge, characteristics, classification, parts of computer, Backup and Restore data.
  • MS Windows, MS Word, MS Excel, PowerPoint.

Wireman Trainee

  • Safe working practices, Environment regulation.
  • Knowledge of Electricity, Generation, Transmission & Distribution.
  • Friction, simple machine, heat and temperature, Engineering Drawings.
  • Electrical wire joints for single and multistring conductors.
  • DC and AC circuits, R-L-C circuits.
  • Measuring Instruments, types of fuses, types of wire & cables, cut outs, switches,
  • Wiring of materials and hardware, house wiring
  • Type of batteries, construction, working and application of Ni-cadmium, lithium cell, lead acid cell etc.
  • Pipe & Plate earthing, electrical/ electronic measurements with appropriate instrument.
  • Construction and working of MCB & ELCB, Megger.
  • Electrical illumination system, Half–wave, full-wave, and bridge rectifiers.
  • DC machine, Alternator set, motors, transformer, Power plants, control panel.

Welder Trainee

  • Safe working practices, Environment regulation.
  • Engineering drawing.
  • Different types of welding machines, metals etc.
  • Measure dimension of components.
  • Gas welding, ARC welding, gas brazing, TIG welding, MIG/MAG welding.
  • SMAW machine, oxy- acetylene cutting plant.
  • Different types of MS pipe joints, and different welded joints testing.
  • GMAW machine, GTAW machine, Plasma Arc cutting.

Selection Process For Odisha Hydro Power Corporation Limited Vacancies 2023

In order to hire talented, capable, meritocratic, dynamic, and suitable candidates for the aforementioned positions, the higher authorities of Odisha Hydro Power Corporation Limited (OHPC) had established this selection procedure. Therefore, every candidate who has a strong desire to work for OHPC MT, DTE, TNE Syllabus 2023 must and should be required to participate in the selection process that was conducted by higher-ups.

  • Computer Based Test
  • Personal Interview

GET, DET, MT Exam Pattern 2023

The ABC Syllabus and specifics about the exam pattern can be found in the sections that follow. Aspirants can learn more information about the exam pattern, including the subject names, maximum marks for each section, total marks, and time limit. We had arranged the details of the exam pattern in a tabular format for the candidates’ convenience. This exam has two sections.

Part Subjects Questions and Marks
Part I Quantitative Aptitude 40 Questions & 40 Marks
General Awareness
Part II Technical Subjects 80 Questions & 80 Marks
Total 120 Questions & 120 Marks

How To Check OHPC MT, DTE, TNE Syllabus 2023 Online?

  • Every student is required to visit the official OHPC website www.ohpcltd.com
  • On the home page, look for the Hindi link to the pdf of the OHPC MT Syllabus 2023.
  • just click on the link.
  • The PDF syllabus for the OHPC DTE MT will then be accessible.
  • You can plan with it by downloading it.

Related post :-


Leave a Comment